Control box

Current position:Home > Products > Control box >

0BC1I Indoor Control Box


Description Parameter
Supply voltage AC110V ~ AC240V, DC48V, 24VDC
Frequency 50Hz ~ 60Hz
Power consumption Flash rate 2W
Photocell sensitivity 30-70 lux (optional)
Flashing 20-60 times/min (optional)
Ambient temperature -30℃ ~ +60℃
Dimensions 155x110x60
Weight 0.5kg

OBC1I is a microprocessor indoor obstruction light control panel device for monitoring and controlling obstruction lights, mostly for telecom, GSM, Microwave and TV towers.

Connected with external photocell, the control panel will turn on/off automatically obstruction lighting system from dusk to dawn. Even at day time, the control panel is still in monitoring status.

0BC1I obsrtruction light controller can be preprogrammed for different obstruction lighting configurations.Each branch of maximum power output of 40W, this product uses the current detection, a common alarm relay output.

Functions & Features
• Switch on / off lights simultaneously 
• Failure instruction function, there are corresponding indicator shows when any of light failed. 
• Instruction or alarm failure (optional).
• Alarm signal output, can connect to other external alarm devices (optional).
• Steady-burning and flashing mode adjustable by DIP switch.
• Auto/manual mode by DIP switch.
• Photocell with prewired shielded cable in five meters long.
• The controller is indoor type (out-door type available upon request).
prev:0BC1O Outdoor Control Box next:none